OctoPill – Haunt Shield 2.0

$22.00$26.00

Preorders now available

 

Features:

  • Fully assembled OctoPill Haunt Shield , stacks onto 4 or 8 channel relays, Arduino Nano & Audio Modules snap right in.
  • Power the OctoPill with 7-12 Volts using the added 5v  regulator.
  • Octo-Control switch allows you to select 4 or 8 channel relay modules.
  • Input’s for a Motion, Foot Switch, Button and more. (22 gage wire recommended)
  • Trigger input now has selectable power output 12v or 5v (Choose before adding to cart.)
  • Use the common Serial MP3 players or the DFPlayer based on your project specifications.

Note: The Octopill trigger output power will be set to 5 Volts when assembling. If you need 12 volts for your trigger please specify your request in the “Order Notes” section prior to checking out.

Setup Information  | More info below.

 

Please Select an Option:

  • $26.00 Octopill Haunt Shield with DFPlayer
  • $22.00 Octopill Haunt Shield without DFPlayer

 

SKU: SC-OPC2 Categories: , Tags: , , ,

Description

What is the OctoPill – Haunt Shield 2.0?

The OctoPill 2.0 is a Arduino Nano Shield that allows you to control anything from 4 to 8 devices using the most common 4 channel and 8 channel Relay modules. No programming necessary. The 2.0 is designed to help clean up all the confusion & mess when it comes to wiring. It stacks on-top of the relay modules for a clean easy solution so you can get up and running quick. This board is a side project designed to work with the Octobanger software from ButtonBanger.com compatible with widows operation systems. This software is completely free If you’d like to support their projects they take donations anything helps!

Features:

  • Fully assembled OctoPill Haunt Shield , stacks onto 4 or 8 channel relays, Arduino Nano & Audio Modules snap right in.
  • Power the OctoPill with 7-12 Volts using the added 5v  regulator.
  • Octo-Control switch allows you to select 4 or 8 channel relay modules.
  • Input’s for a Motion, Foot Switch, Button and more. (22 gage wire recommended)
  • Trigger input now has selectable power output 12v or 5v (Choose before adding to cart.)
  • Use the common Serial MP3 players or the DFPlayer based on your project specifications.

OctoPill 2.0 Package Contents

  • One OctoPill Fully Assembled

Not Included/ Needed

  • Arduino Nano (Link)

  • 4 or 8 Channel Relay Board 4ch (Link) 8ch (Link)

  • MP3 SYNC 2.0 (Using Octo Control) , 2amp USB Charger, or your own 5VDC power supply using the Octo-Control port.

  • Octo Banger Software (Free) Direct Download Below

OPTIONAL HARDWARE

  • Serial MP3 Player (For High Quality Audio) (Link)

If you go this route we recommend using the Audio Adapter Board available here (Link)

 

  • DFPlayer (Selectable prior to checking out) or from (Link)

  • 8-16GB Micro SD Card (To Store your High Quality Audio & Show Files in) (Link)

  • Motion Detector (Link)

  • Foot Switch (Link)

Additional information

OctoPill Options

OctoPill Haunt Shield Assembled – With DFPlayer audio module, OctoPill Haunt Shield Assembled – Without DFPlayer audio module

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.