-
-
- Haunt Tech, Prop Controllers
OctoPill Prop Controller Shield V1
- $15.00
- What is the OctoPill? The OctoPill is a Arduino Nano Shield that allows you to control anything from 4 to 8 devices using the most common 4 channel and 8 channel Relay modules. No programming, No soldering. It’s compatible with the OctoBanger Software from Buttonbanger.com. OctoPill Setup & FAQ Page
- Add to cart
-
-
-
- Haunt Tech, Prop Controllers
OctoPill – Haunt Shield 2.0
- $22.00 – $26.00
- Preorders now available Features: Fully assembled OctoPill Haunt Shield , stacks onto 4 or 8 channel relays, Arduino Nano & Audio Modules snap right in. Power the OctoPill with 7-12 Volts using the added 5v regulator. Octo-Control switch allows you to select 4 or 8 channel relay modules. Input's for a Motion, Foot Switch, Button and more. (22 gage wire recommended) Trigger input now has selectable power output 12v or 5v (Choose before adding to cart.) Use the common Serial MP3 players or the DFPlayer based on your project specifications. Note: The Octopill trigger output power will be set to 5 Volts when assembling. If you need 12 volts for your trigger please specify your request in the "Order Notes" section prior to checking out.…
- Select options
-
-
-
- Audio, Haunt Tech, Prop Controllers
The Kraken – Haunt Shield
- $25.00
- What is the The Kraken Shield Controller? The Kraken Prop Controller Shield is a hardware project derived from the OctoPill v1 project. We created The Kraken to make it easier for you to get your project up and running quick. The Kraken allow's you to take control of any prop or show that your heart desires. Simply Plug your Arduino Nano 3.0 into the board and start creating. Check out The Kraken's Setup Page.
- Select options
-
-
- Out of Stock
- Accessories, Haunt Tech
Arduino Nano 3.0
- $11.00
- Arduino Nano 3.0 Give your controllers the Brains they need! Works with OctoPill 2.0 & The Kraken Shields.
- Read more
-
-
-
- Accessories, Haunt Tech, Triggers and Sensors
EZ Trig PIR- Motion Sensor
- $10.00
- Need simple PIR (Motion) for your prop or show? the EZ Trig PIR Sensor is just that... Easy. This PIR sensor is designed to work with all of our second generation controllers. Easy screw terminal connections allow you to extend your sensors location. Included QTY: 1 EZ Trig PIR Motion Sensor
- Add to cart
-
-
-
- Accessories, Haunt Tech
Octo-Serial MP3 Adapter
- $3.00
- The serial audio adapter helps you add a serial MP3 player to a Octo-Pill Haunt Shield 2.0 or any project that you may have. Simply allows an easy 3 to 4 pin secure connection to your serial MP3 player.
- Add to cart
-
-
-
- Accessories, Haunt Tech, Triggers and Sensors
Foot Trigger SPDT
- $10.00
- Simple foot switch to activate the prop controller of your choice. Features Single pull double throw pre-wired switch. Works with all Scare Company controllers.
- Add to cart
-
-
-
- Accessories, Haunt Tech
MP3 Sync – Single Channel Relay
- $5.00
- Features: 1-channel relay interface board that can be controlled directly from the relay sync It can control various applications that have a larger currents. Relay output maximum contact is AC110V ~ AC250V 10A and DC30V 10A. LED Indicators for ON/OFF Status Red = Power (Relay Off) Green= Power (Relay On)
- Add to cart
-
